Systematic Dry Cleaning for the Preservation of Monuments, for Paintings, and for Artistic Objects with Diverse Surfaces.

akatec Fine Spray Gun 404401

The akatec fine spray gun 404401 is based on an air pressure gun as commonly used for plaster and gypsum. The mode of operation is the injection principle which will carry the akablast powder by airstream through the gun´s nozzle onto the surface which is to be cleaned. Included are two extra nozzles especially designed for the use of akablast powder grades. Unlike the predecessor model, the new akatec fine spray gun 404401 has two control options, one for regulating the air stream and one for the powder supply.

Generally all spray guns using this technology can be used after some modifi cations. In case of any modification, the producers guaranty is most likely to extinguish.

Article no. 404401


Dimensions/ Data
Content Hopper: 5 l
Dimensions (W/D/H): 250 x 235 x 475 mm
Air Intake: 225 l/min
Recommended compressor output: mind. 250 l/min
Nozzle size akablast: 8 mm
Recommended hose diameter: 6 mm
hose length: max. 10 m
Max. working pressure: 5 bar
Weight: 1,26 kg
1x hopper spray gun type TSP
2x akablast nozzles
3x plaster nozzles (Ø: 4,5 / 6,0 / 8,0)
2x gypsum nozzles (Ø: 15,0 /18,0)
1x 45° angle
2x hose clamps
1x hopper 5 l
1x needle for gypsum
1x manual