Systematic Dry Cleaning for the Preservation of Monuments, for Paintings, and for Artistic Objects with Diverse Surfaces.

akatec Micro Blasting System 404420

The akatec Micro Blasting System 404420 is a pressurized blasting system with low air consumption for pinpoint accurate blasting.

Aside from air pressure, the Micro Blast System requires no additional power source, so the device can either be connected with a compressed air system of a blasting cabinet or attached to a compressed air pipe. When considering the source of the compressed air, it is necessary to ensure that only clean and dry air reaches the Micro Blasting System. Aka recommends using standard drying devices. The dryer from the akatec Blasting Device 404450 can also be utilized.

Its compact size and light weight enable the Micro Blasting System to be transported easily and deployed for almost any application. With the akatec Micro Blasting System 404420, the pressure is adjusted using a lockable pressure regulator. The integrated quick air-release valve discontinues the air flow immediately after the device is switched off, thus preventing undesired “post-blasting.”

Article No. 404420


Dimensions / Data
Container Volume: 0,7 l
H x W x D (mm): 240 x 200 x 340
Operational Pressure: max. 6 bar
Air Intake: mind. 110 l/min with 1.8 mm nozzle
Weight: 5,8 kg (without pedal)
Safety Precautions: Personal safety equipment
Designed for: akablast fine
akablast extra fine
akablast white fine
akablast white extra fine